Skip to content

How a whole-home package is packed into containers

Most damage in a container shipment is caused before the doors close, not by the sea crossing. Which is why loading has to be planned while the drawings are still being approved.

How a whole-home package is packed into containers

A whole-home package is not one product in a large box. It is a few hundred panels, carcasses, doors, hardware cartons, stone slabs and sanitary ware, all with different weights, fragility profiles and dimensional quirks — and they all have to share 33 cubic metres of a 20-foot container or 67 of a 40-foot.

The common assumption is that packing is a warehouse task that happens after production ends. In practice, the loading plan has to exist at the drawing stage, because it constrains the design.

Loading is planned at the drawing stage

Three design decisions are actually logistics decisions in disguise:

  • Whether a tall unit is one piece or two. A 2.4 m wardrobe carcass shipped assembled occupies a shape that loads badly and damages easily. Split at a defined joint and the same unit ships flat, with the joint detailed so it is invisible after assembly.
  • Whether doors travel fitted or separate. Doors fitted to carcasses are the single most common source of transit damage, because any movement in the crate transfers directly to a hinge and then to the door edge.
  • How stone and glass are positioned. Slabs and glass travel vertically, braced, never laid flat with weight above them. This determines crate sizes for the whole load, not just those items.

A drawing approved without these decisions is a drawing that will be re-cut later, or a container that loads at 80 percent capacity.

Flat-pack and assembled units travel differently

Assembled units take up air. The volume of a carcass is mostly emptiness, and you pay freight on volume. Flat-packing typically reduces the shipped volume of cabinetry by 40 to 60 percent, which is why most export cabinetry is flat-packed and most domestic cabinetry is not.

The trade-off is site labour. Flat-packed means someone at destination assembles, and that requires decent instructions, labelled parts and a joint scheme that is actually reproducible. A package that arrives flat but indistinguishable — hundreds of near-identical panels with no coding — is worse than one that arrives assembled.

Three damage patterns, and how they are avoided

Corner and edge crush

Caused by panels shifting into each other under load. Fixed by corner protection on every crate, and by filling voids so nothing can move. A crate that rattles when shaken is a crate that is already damaging its contents.

Moisture and mould

Caused by loading during rain, or by pallets sitting on a wet floor. Sea freight crosses several climate zones and condensation forms inside the container. Fixed with moisture barriers, desiccant, and refusing to load wet timber — which sometimes means delaying a sailing.

Crush from above

Caused by stacking heavy stone or sanitary ware over cabinetry. Fixed by a load order that puts heavy items at the floor and along the container's centreline, with cabinetry crates on top and never the reverse.

What the packing list should tell you

A packing list is not a formality. It is the document that lets two people 8,000 km apart agree on what was loaded, in what condition. Ours records, for every crate:

  • Crate number, dimensions and gross weight
  • Room and category it belongs to, not just a product name
  • Contents by item code, with quantities
  • Photographs of the crate before closing, and of the container being loaded

The room reference matters more than it sounds. On a whole-home package, “crate 14” tells a site team nothing; “crate 14 — master bedroom, wardrobe A” means the crate goes to the right room on the first attempt instead of being opened in the wrong one and left there.

If a claim ever comes up, the photographs taken before the container closed are the only evidence that matters. Take them whether or not you expect a problem.

What to ask before production ends

Ask for the loading plan before the last panel is cut, not after. Three questions are enough to find out whether a supplier plans loads properly: what is the crate count, which items travel flat, and can you photograph the crate before it closes. A supplier who cannot answer the first one has not planned the second.

PreviousHow to compare cabinet quotes from Chinese suppliers

Questions

Questions this piece raises

How much container space does a whole-home package take?
It depends on how much is flat-packed and how much stone or sanitary ware is included. Flat-packing typically reduces shipped cabinetry volume by 40 to 60 percent, which is often the difference between one container and two. The estimate should come with the quote, not after it.
What happens if something arrives damaged?
It is settled by the record, not the argument. Every crate should be photographed before it closes and against its packing list, and the container photographed while loading. With that record, a claim is a replacement order; without it, it becomes a negotiation.

Send the quote or the drawing

If this piece raised a question about your own project, send the specification and we will tell you where it stands.

Foshan, China · GMT+8 Reply typically within 2 business days
Let's chat